How To Extend The Life Of Fiber Laser Cutting Machine

1．Cooling system maintenance

The water inside the water cooler needs to be replaced regularly, and the frequency of replacement is usually one week. The water quality and water temperature of the circulating water directly affect the service life of the laser tube. It is recommended to use pure water or distilled water and control the water temperature below 35 °C. It is easy to form scale without changing the water for a long time, thus blocking the waterway, so be sure to change water regularly.

2．Dust removal system maintenance

After a long time of use, the fan will accumulate a lot of dust, which will affect the exhaust and deodorization effects, and will also generate noise. When the fan is found to have insufficient suction and poor smoke exhaust, first turn off the power, remove the dust from the inlet and outlet air ducts on the fan, then turn the fan upside down, stir the blades inside until they are clean, and then install the fan. Fan maintenance cycle: about one month.

3．The optical system maintenance

After the machine works for a period of time, the surface of the lens will be glued with a layer of ash due to the working environment,which will reduce the reflectivity of the reflecting lens and the transmittance of the lens, and ultimately affect the working power of the machine.At this time, use a cotton wool and ethanol to carefully wipe along the center of the lens to the edge. The lens should be gently wiped to prevent damage to the surface coating; the wiping process should be handled gently to prevent it from falling; be sure to keep the concave surface facing down when installing the focusing mirror.

Above are some basic machine maintenance measures, if you want to know more machine maintenance tips, please contact us.