How to solve the problem of laser tube cutting machines failure

During the use of laser tube cutting machines, some failures may occur due to long-term use, incorrect data setting, carelessness in daily maintenance, etc.

The common faults of laser cutting pipe machine are mainly:

1. The laser cutting pipe is not completely cut through.

The common root cause is that the laser nozzle head model specification of the laser tube cutting machines does not match the thickness of the tube, and the laser nozzle must be replaced; it may also be that the laser cutting speed set by the laser tube cutting machines is too fast, which requires reducing the laser tube cutting the angular velocity of the machines.

2. Laser-cut product workpieces have rough edges.

It may be that the laser focus point of the laser tube cutting machines is positioned incorrectly, and it can be corrected before use; it may be caused by insufficient power of the laser tube cutting machines, check whether the laser generator is working normally. It is also possible that the acceleration of laser tube cutting machines is very slow. At this time, it is necessary to increase the cutting line rate.

G-CUT LASER reminds you to consider the following factors when choosing laser tube cutting machines:

1. Whether the equipment is in the scope of production and processing, such as the size, thickness, etc. of pipe fittings.

2. Whether the processing technology of the laser cutting machine can meet the safe operation regulations.